Yaesu FTDX101MP Technical Supplement page 3

Receiver
Circuit Type:
Intermediate Frequencies:
Sensitivity:
Squelch Snsitivity (TYP):
Selectivity (WIDTH: Center):
IF Rejection:
Image Rejection:
Maximum Audio Output:
Audio Output Impedance:
Conducted Radiation:
Specifications are subject to change, in the interest of technical improvement, without notice or obligation,
and are guaranteed only within the amateur bands.
Double Superheterodyne
1 st: 9.005 MHz (MAIN), 8.9000 MHz (SUB
2 nd: 24 kHz (MAIN/SUB)
SSB, CW (BW: 2.4 kHz, 10 dB S+N/N)
1.8 MHz - 30 MHz
50 MHz - 54 MHz
70 MHz - 70.5 MHz 0.16 µV (AMP 2 "ON")
AM (BW: 6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
0.5 MHz - 1.8 MHz 6.3 µV
1.8 MHz - 30 MHz 2 µV (AMP 2 "ON")
50 MHz - 54 MHz
70 MHz - 70.5 MHz 2 µV (AMP 2 "ON")
FM (BW: 12 kHz, 12 dB SINAD)
28 - 30 MHz
50 MHz - 54 MHz
70 MHz - 70.5 MHz 0.25 µV (AMP 2 "ON")
SSB, CW, AM
2 µV (1.8 MHz - 30 MHz, 50 MHz - 54 MHz) (AMP2 "ON")
FM
0.25 µV (28 MHz - 30 MHz) (AMP2 "ON")
0.2 µV (50 MHz - 54 MHz) (AMP2 "ON")
Mode –6 dB
CW (BW: 0.5 kHz) 0.5 kHz or better
SSB (BW: 2.4 kHz) 2.4 kHz or better
6 kHz or better
AM (BW: 6 kHz)
FM (BW: 12 kHz) 15 kHz or better
60 dB or better (1.8 MHz - 28 MHz Amateur bands, VC-tune "ON")
60 dB or better (50 MHz Amateur band)
70 dB or better (1.8 MHz - 28 MHz Amateur bands)
60 dB or better (50 MHz Amateur band)
2.5 W into 4 Ohms with 10% THD
4 to 16 Ohms (4 Ohms: nominal)
Less than 4 nW
SPESIFICATIONS-2
Specifications
0.16 µV (AMP2 "ON")
0.125 µV (AMP 2 "ON")
1 µV (AMP 2 "ON")
0.25 µV (AMP 2 "ON")
0.2 µV (AMP 2 "ON")
–60 dB
750 Hz or less
3.6 kHz or less
15 kHz or less
25 kHz or less
FTDX101MP/D Technical Supplement