Removing The Meat Drawer; Removing The Freezer Shelf; Using The Ice Cube Trays - Whirlpool ET14JM Use And Care Manual

Removing the meat drawer and cover
(ET~~ZK)
To remove the meat drawer:
1.
Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release rear clips from
Remove meat drawer
before cover.
shelf.
3. Tilt cover up at front.
4. Pull cover forward and out.
To replace the cover:
1. Pii notches and clips on underside of cover
over rear and center cross bars on shetf.
2. Lower cover into place.
3. Pull cover forward to secure rear clips onto
shelf.
4. Replace meat drawer.
Removing the freezer shelf
The freezer shetf can be removed for easier
cleaning.
To remove the shelf:
1. Remove items from the shelf.
2. Lift back of shelf over stop.
3. Slide shelf straight out.
To replace the shelf:
1. Slide back of shelf into shelf tracks on walls of
cabinet.
2. Slide shelf in all the way.
Using the ice cube trays
(ETWJK, ET14UK AND ET14ZK)
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
9