Default Jumper Positions - Texas Instruments AFE5832 User Manual

C.1 EVM Headers, Test Points, and Configuration
This section describes the functions of the headers on the EVM. It also provides a list of test points on the
EVM that are useful for debug and general-use purposes.
C.1.1 EVM Header Configuration
The AFE5832 EVM is flexible in its configurability through the use of 2- and 3-pin headers. The default
configuration of the EVM is set to facilitate initial testing, requiring minimal bench equipment.
shows the default positions of all headers.
SLOU489 – August 2017
Submit Documentation Feedback
Figure 60. Default Jumper Positions
Copyright © 2017, Texas Instruments Incorporated
SLOU489 – August 2017
Hardware Configuration
Hardware Configuration
Appendix C
Figure 60
49