Table of Contents
Advertisement
USB DATA TRANSFER
The fourth generation BioHarmonex
through the internet. Any software bugs can be repaired by updating, and new features and programs
can be added to the device.
After installing the BioHarmonex's client program, the program will note the current software information
on your device and, if any updates are available, a message appears in the lower right corner of your
computer.
To establish a data connection, you must do the following:
1.
Download and install the client software on your computer from www.bio-harmonex.com.
2.
Connect the BioHarmonex
3.
Enter the "USB DATA TRANSFER" submenu in the "SETTINGS" menu of the BioHarmonex
4.
Wait until the previously installed client program on your computer recognizes and reads your
®
BioHarmonex
data.
5.
If there is an update available, start it by selecting the YES option.
6.
Updates will be automatically downloaded and installed on your device.
7.
After downloading the update files, the device will disconnect from the computer and automatically start
the update. Please do not switch off the BioHarmonex
track the installation process on your device's display.
8.
The device restarts when the update is complete.
NOTE:
After you have installed the client program to your computer, select the „auto-start with the
system" option in program settings to get notification of any updates automatically.
BIOHARMONEX 4.0 USER'S GUIDE
®
allows for continuous improvements and updating of the software
®
to your computer using the micro USB-USB cable included in the package.
®
, wait until the software update is finished. You can
®
.
24
Hide quick links:
Advertisement
Table of Contents
