Temperature; Removing The Freezer Trivet - Whirlpool EDI9SK Use & Care Manual

Adjusting the refrigerator shelve
Shelves can be adjusted to match the way you
your refrigerator.
1. Lift front slightly.
LlFl THE FRONT
THEN THE BACK
2. Lift back off supports.
3. Replace in reverse order.
Removing freezer shelves.. .
1. Lift front slightly.
2. Lift back off supports.
LIFT THE FRONT
3. Replace in reverse order.
THEN THE BACK
Adjusting meat drawer temperature...
Cold air flows against the meat drawer through
f
an opening between the freezer and the re-
frigerator. This helps keep the meat drawer colder
than the rest of the refrigerator.
Setthecontrol to letmoreorlesscoldairthrough.
USE CONTROL TO ADJUST
MEAT DRAWER TEMPERATURES
Removing the meat drawer and cover...
To remove the meat drawer:
1. Slide meat drawer straight out to the stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace in reverse order.
To remove the cover:
PUSH THE TAB
TO CLEAR THE COVER.
l
Cover is held in place by two pegs at the back
and a notched tab in front.
AAL. _.~
1. Press front tab out of the way.
2. Lift cover front.
SNAP BACK INTO PLACE.
3. Lift back off the pegs.
4. Replace in reverse order.
Removing the freezer trivet.. .
1. Lift the trivet from the support brackets on the
back wall.
2. Replace in reverse order.