Table of Contents
Advertisement
®
MINI-ARRAY
Instruction Manual
1. System Overview
Paint Booth
Profiling
Figure 1-1. Typical MINI-ARRAY Applications
Banner Engineering Corp.
Minneapolis, MN U.S.A.
•
www.bannerengineering.com • Tel: 763.544.3164
The Banner A-GAGE
such as on-the-fly product sizing and profiling, edge-guiding and center-guiding, loop
tensioning control, hole detection, parts counting, die ejection verification, and similar
uses.
A typical MINI-ARRAY System consists of five components:
• a Controller module,
• an emitter and corresponding receiver, and
• two interconnecting cables.
Sensors are available in array lengths from 6" to 4' (in 6" increments), plus 5' and 6'
array models, as listed on page 7. Sensors are available with either 9.5 mm (3/8") or
19.1 mm (3/4") beam spacing, which translates to either 32 or 16 beams per foot of
array length. Sensors with 3/8" beam spacing have a sensing range of up to 6 m (20').
Sensors with 3/4" beam spacing have a sensing range of up to 17 m (55'); 5' and 6'
arrays have shorter range (see Specifications).
Inspection Applications
®
MINI-ARRAY measuring light screen is ideal for applications
System Overview
Box Profiling
Edge Guiding
P/N 43298 rev. E
3
Hide quick links:
Advertisement
Table of Contents
