Adjustlng The Meat Drawer; Temperature; Removlng The Snack Bin - Whirlpool ED25YQ Use & Care Manual

Removing the meat drawer and cover
To
remove the meat drawer:
1.
Slide the meat drawer straight out to the
stop.
Pull out to the stop, lift
the front and pull again.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1.
Remove meat drawer and crisper.
2. Lift front of cover off supports.
3. Lii cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on
walls of refrigerator.
2. Lower front into place.
3. Replace meat drawer and crisper.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer
through an opening between the freezer and
the refrigerator. This helps keep the meat
drawer colder than the rest of the refrigera-
tor for better storage of meats.
Slide the control to let more or less cold air
through.
Use control to
adjust meat drawer
temperature.
Removing the snack
bin
To remove the snack bin:
1.
Slide snack bin straight out to the stop
with an even, constant motion.
2. Lift the front.
3. Slide bin out the rest of the way.
4. Replace in reverse order.
Pull out to the
stop, lift the front
and pull again.