Table of Contents
Advertisement
Installing
it properly
1.
Allow 3 inches (7.5 cm) between over-
head cabinets and refrigerator top.
2. Allow at least 1 inch (2.5 cm) between
the refrigerator condenser on the back
and the wall.
3. Allow % inch (1.25 cm) on each side of
the refrigerator for ease of installation.
4. If the hinge side of the refrigerator is to
be against a wall, you might want to
leave extra space so the door can be
opened wider.
5. Level your refrigerator.
Leveling
it
Your refrigerator has two front, adjustable
rollers to prevent rocking on uneven floors.
To adjust rollers:
1.
Roll refrigerator into position.
2. Adjust rollers by turning the leveling
screws, located at the front of the base.
l
Turn clockwise to raise.
l
Turn counterclockwise to lower.
NOTE:
Rollers are adjusted correctly
when the refrigerator no longer rocks
when the doors are opened or closed.
3. Repeat this procedure whenever the
refrigerator is moved.
NOTE:
If you want the doors to close easier,
use the rollers to raise the front of the
refrigerator slightly.
Use a screw-
drlver to adjust
Vlew of roller with hinge In place
Levellng
screw
7
Advertisement
Table of Contents
