Before Installation; Remote Controller Installation - Daikin BRC7E830 Installation Manual

• If both this kit and fresh air intake kit are installed, only one duct chamber shall be used. Refer
to the installation manual of the fresh air intake kit.

2. BEFORE INSTALLATION

2-1 ACCESSORIES
Check if the following accessories are included with your unit.
Name Receiver
Quantity 1 set.
Shape
Dry cell battery
Name
LR03 (AAA)
Quantity 2 pcs.
Shape
2-2 NOTE TO THE INSTALLER
• Be sure to instruct the customer how to properly operate the system showing him/her the attached
operation manual.

3. REMOTE CONTROLLER INSTALLATION

<Installing wireless remote controller>
• Do not throw the remote controller or impose large shocks. Also, do not store where it may be exposed
to moisture or direct sunlight.
• When operating, point the transmitting part of the remote controller in the direction of the receiver.
• The direct transmitting distance of the remote controller is approximately 23 ft.
• The signal cannot be transmitted if something such as curtains blocks the receiver and the remote
controller.
• Installing to a wall or a pillar
(1) Fix the remote controller holder with the
screws.
(2) Slide the remote controller into the remote
controller holder from the top.
3P155845-5H English
Tapping screw for
Transmitter board
transmitter board
1 pc.
Screw for installing
Unit No. label remote controller
1 pc.
1 2 3
2 3
1
1 2 3
Wireless remote
controller
2 pcs. 1 pc.
Operation manual
Installation manual
holder
2 pcs. 1 each
Remote
controller holder
1 pc.
Clamp
1 pc.
(2)
(1)
2