Siemens SIPROTEC Manual page 81

5.2.1.3 Control Authority
Offset Designation of the SIPROTEC objects
9 / 5 Cntrl Auth
9 / 6 ModeLOCAL
9 / 7 ModeREMOTE
5.2.2 Measured values
Designation of the
Offset
SIPROTEC objects
10 3P1_V1 =
12 3P1_V2 =
14 3P1_V3 =
16 3P1_I1 =
18 3P1_I2 =
20 3P1_I3 =
22 3P1_P =
24 3P1_Q =
26 3P1_f =
28 3P1_cosPhi =
5.2.3 Metered measurands
Designation of the
Offset
SIPROTEC objects
30 <user-defined>
34 <user-defined>
38 <user-defined>
42 <user-defined>
SIPROTEC PROFIBUS DP - Bus mapping 6MD662/3/4
C53000-L1840-B011-03
• Ref. to chap. 2.3.2 for notes regarding scaling of measured values.
Comments
3P1 Phase to Earth Voltage V1
3P1 Phase to Earth Voltage V2
3P1 Phase to Earth Voltage V3
3P1 Phase Current I1
3P1 Phase Current I2
3P1 Phase Current I3
3P1 Active Power Three Phase
3P1 Reactive Power Three Phase
3P1 Frequency
3P1 Active Power Factor Three Phase
• Ref. to chap. 2.3.3 for notes regarding routing and scaling of metered measurands.
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
Comments
Control authority
(0 = REMOTE, 1 = LOCAL)
Control mode LOCAL
(0 = LOCKED, 1 = UNLOCKED)
Control mode REMOTE
(0 = LOCKED , 1 = UNLOCKED)
(32767 corresponds to ...)
Comments
Standard mapping 3-4
Scaling Transmission
3276.7 Primary value
3276.7 Primary value
3276.7 Primary value
3276.7 Primary value
3276.7 Primary value
3276.7 Primary value
3276.7 Primary value
3276.7 Primary value
3276.7 Primary value
32.767 Primary value
Scaling
31
(2 -1 corresponds to ...)
31
2 -1 impulses
31
2 -1 impulses
31
2 -1 impulses
31
2 -1 impulses
Internal
object no.
-
-
-
as
Internal
object no.
-
-
-
-
81