Transformer Tap Change Commands; Single Commands And Taggings - Siemens SIPROTEC Manual

4.1.2

Transformer tap change commands

Offset Designation of the SIPROTEC objects
3 / 4 <user-defined> LOWER
3 / 5 <user-defined> RAISE
3 / 6 <user-defined> LOWER
3 / 7 <user-defined> RAISE
4.1.3

Single commands and taggings

Offset Designation of the SIPROTEC objects
4 / 0 <user-defined> OFF
4 / 1 <user-defined> ON
4 / 2 <user-defined> OFF
4 / 3 <user-defined> ON
4 / 4 <user-defined> OFF
4 / 5 <user-defined> ON
4 / 6 <user-defined> OFF
4 / 7 <user-defined> ON
5 / 0 <user-defined> OFF
5 / 1 <user-defined> ON
5 / 2 <user-defined> OFF
5 / 3 <user-defined> ON
5 / 4 <user-defined> OFF
5 / 5 <user-defined> ON
5 / 6 <user-defined> OFF
5 / 7 <user-defined> ON
6 / 0 <user-defined> OFF
6 / 1 <user-defined> ON
6 / 2 <user-defined> OFF
6 / 3 <user-defined> ON
6 / 4 <user-defined> OFF
6 / 5 <user-defined> ON
SIPROTEC PROFIBUS DP - Bus mapping 6MD662/3/4
C53000-L1840-B011-03
• Transformer tap change commands can be routed on these positions as "Source
system interface" using the DIGSI Configuration matrix.
• Single commands and taggings can be routed on these positions as "Source
system interface" using the DIGSI Configuration matrix.
Comments
not pre-allocated
not pre-allocated
Comments
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
Standard mapping 3-2
Internal
object no.
-
-
Internal
object no.
-
-
-
-
-
-
-
-
-
-
-
65