Table of Contents
Advertisement
1.
Pull the burner cap straight up from the
burner base.
2. Clean the burner cap with warm, soapy water
and a sponge. You can also clean it with a
mildly abrasive scrubbing pad or cleanser.
Do not clean the burner cap in a dishwasher
or
self-cleaning
oven.
3. If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to
clean the area.
, clean them with a
straight
pin. Do not
enlarge
or distort
the
port. Do not use a
wooden
toothpick.
If
the burner needs to be
adjusted, call a qualified
technician
for service.
5. After cleaning the gas tube opening and ports,
replace the burner cap.
Alignment
To replace the burner
cap, make sure the
alignment pins on
the burner cap are
properly aligned with
the burner base.
6.
Turn on the burner to see if it will light. If the
burner does not light after you have cleaned it,
contact an authorized
service technician.
Do
not service the sealed burner yourself.
For normal use of your range, you do not need to
remove the door. However, if you find it necessary
Door removaf
to remove the door, follow the instructions
in this
pin hole
I
section.
NOTE: The oven door is heavy.
Before removing
the door:
1.
Use a putty knife or screwdriver
and insert it at
the bottom corner of the door stop clip.
2. Pry door stop clip free and remove from front
frame hinge slot. Take care not to scratch
porcelain.
3. Repeat procedure for other door stop clip.
\
Door stop clip
I
Hinge
Front frame
hanger
hinge slot
continued
on next page
27
Advertisement
Table of Contents
