Whirlpool TGS325G Troubleshooting Manual page 22

Whirlpool self-cleaning gas range use & care tgs325g
Hide thumbs Also See for TGS325G:
Table of Contents

Advertisement

1. Press AUTO CLEAN.
YOU SEE
ON
I
The clean indicator light will light up.
This will automatically
set a 3%hour
Self-Cleaning
cycle.
NOTE: There will be a 30-minute cool-down
W hour before the cycle is over.
2. Set the cleaning time (optional).
PRESS
YOU SEE
ON
If you want a Self-Cleaning
cycle longer or
shorter than 3% hours, use the hour and minute
A
pads to set the cleaning time you want. Press
TEMP/
the "up" (A) or "down" (V) pad(s) until a time
between 2%-4X hours shows on the display.
cl
TIME
V
l
Use 2% hours for light soil.
l
Use 3!4-4% hours for average to heavy soil.
(example for 4lkhour
cleaning
time)
3. Start the oven.
PRESS
YOU SEE
ON
The on and heat indicator liahts will
light up.
NOTES:
l
Make sure the door is closed all the way. If the
door is open even a little, it will not lock. If the
door is closed, it will lock after you press
START/ENTER.
l
Do not attempt to open the oven door while
locking.
4. After the Self-Cleaning
cycle starts:
The door locked indicator light will light up when
the oven door locks.
5. After the Self-Cleaning
cycle ends and the oven
reaches normal baking/roasting
temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
YOU SEE
Press OFF/CANCEL
to clear the display.
PRESS
22
-

Advertisement

Table of Contents
loading

Table of Contents