Table of Contents
Advertisement
To set the
(%) setting in each
Divide the
allowable charger output current of 75A
by the
's maximum charge capacity of 150A.
So, 75 150, gets an approximate value of 0.50 (or 50%)
which can be set exactly to 50%.
Set the
(%) setting to
In this example, the actual output current is limited to 50% of
150A which is 75A. Therefore, the actual System Total
BULK output current comes out to about 150A.
60
:
which means 50%.
Stacking Features
Advertisement
Table of Contents
