Dimension Drawings - Siemens Simodrive 1PH7 Planning Manual

Dimension Drawings

For 1PH7 motors, for the dimensions, specified in the following table, the subse-
quent deviations are permissible.
Table 4-1
Dimen-
sions
a,b
b
1
d, d
1
e
1
h
i, i , i
1 2
u, t, u , t
1
Note
Siemens AG reserves the right to change the dimensions of motors without prior
notice as part of ongoing improvements to the mechanical design. Dimension
drawings can go out-of-date. Updated dimension drawings can be requested at no
charge.
 Siemens AG, 2004. All rights reserved
Induction Motors, 1PH7 (APH7S) – 05.04 Edition
Permissible dimension deviations
up to 250 mm
above 250 mm to 500 mm
above 500 mm to 750 mm
up to 230 mm
above 230 mm
up to 11 mm
above 11 mm up to 50 mm
above 50 mm
up to 200 mm
above 200 mm up to 500 mm
above 50 mm up to 250 mm
above 250 mm up to 500 mm
up to 85 mm
above 85 mm up to 130 mm
above 130 mm up to 240 mm
1
Permissible deviations
"0.75 mm
"1.0 mm
"1.5 mm
DIN 7160 j6
h6
DIN 7160 j6
k6
m6
"0.25 mm
"0.5 mm
DIN 747 –0.5 mm
–1.0 mm
"0.75 mm
"1.0 mm
"1.5 mm
acc. to DIN 6885 Sheet 1
4
1PH7/4-135