Surface Burners - Whirlpool SS373PEX Use And Care Manual

Typical surface burner flame
at highest setting
3. Lift off the burner caps.
4. Wash the grates and caps with
warm, soapy water or in a dish-
washer, Use a nonabrasive
scrubbing pad for cooked-on foods.
Rinse and dry well.
5. Replace the burner grates and
burner caps.
Surface burners
Remove surface burner cover. To
remove cover, push in buttons on the
sides while lifting the cover.
Wipe off surface burners, cover and
burner pan with warm, soapy water and
a sponge after each use. Use a plastic
scrubbing pad for cooked-on foods.
If burner ports are clogged, clean with
a straight pin.
Do not enlarge or distort
the ports. Do not use a toothpick to
clean the ports.
Occasionally check the burner flames
for proper size and shape as shown. A
good flame is blue in color. If flames lift
off ports, are yellow, or are noisy when
turned off, you may need to clean the
burners (see above or "Cleaning tips" on
page 34) or call a qualified technician
for adjustment.
Replace surface burner cover.
25