Using The Vent System; Changing Surface Burner Module - Whirlpool SS373PEX Use And Care Manual

Uslng Your Range
Continued
Using the vent system
Using the co&top's built-in downdraft
vent fan removes cookfng vapors, odor
and smoke.
The fan wffl always come on at LOW
speed when the grill module is in use,
but may be manually switched to HIGH.
The fan cannot be turned off when the
grill module is operating.
When using surface units, turn the
Vent Fan Control Knob clockwise to
HIGH or LOW. You will hear a click
when the fan comes on. Turn counter-
clockwfse to turn the fan OFF.
The fan filter must be in place for the
fan to operate proparly.
Personal Injury Hazard
Do not put hands In vent box
when fan or controls are on. The
vent fan system turns on auto-
matically when the grill is uti
Turn fan and cooktop controls to
Off. Failure to do
l
o could resuft
In personal Injury.
Cty;u ;g surface burner
9
The surface burner module will work on
both sides of the cooktop. (Gee page 26
for grill removal instructions.)
Bum and Electtlcaf Shock Hazard
Be sure all controls are off and the
module ls cool before handling
rnodula Failure to do so could
result in bums or electrical shock
To remove surface burner module:
1.
Lfft off surface burner grates and
caps-
2. Lift slightly by the handle.
3. With both hands, pull module toward
you to clear oriiices (gas lines). Lift
Out.