Table of Contents
Advertisement
Using your range
Using the Surface Burners
These ranges are equipped
with either standing pilots or electronic
ignitors.
Standing pilots must be lit initially with a match following the directions on
page12. The pilot light will remain lit when the burners are turned off. To turn a
burner on again, just push in and turn the control knob to LITE and the burner
will light. Electronic ignitors automatically
light the burners each time they
are used.
Control
knobs
must be pushed
in,
then turned to LITE position. On eiec-
tronic ignitor models, the clicking
sound is the ignitor sparking.
After the burner lights, turn the con?roi
knob back to a desired setting. The
control knob can be set anywhere
between HI and OFF.
Do not cook
with the control
In the LITE posltlon.
Surface
Burner Indicators
The solid square in the surface burner
indicator shows which surface burner
is turned on by that knob.
In Case of a Prolonged
Power Failure
Surface burners with electronic
igniters can be manually lighted. Hold a lit
match near the burner and turn the control to the LITE position. Affer the burner
lights, turn the control to the desired setting. Power failures will not affect Stand-
ing Pilots.
6
Advertisement
Table of Contents
