Using And Replacing The Light Bulbs; The Cooktop Light - Whirlpool SF514OEY Use And Care Manual

Caring For Your Range
Continued
Using and replacing the light
bulbs
The cooktop light
The fluorescent light is on the bottom of the
control panel. The Cooktop Light Switch is
located on the left side of the front control panel.
Electrical Shock Hazard
Make sure power to the range has been
disconnected at the main power supply
and that all surface burners are off and
cool.
Failure to follow the above could result
in electrical shock or burns.
To replace the cooktop light:
1. Turn off the control knobs and unplug
appliance or disconnect at the main power
supply.
2. Lift up the cooktop and disconnect the
electrical plug to the backguard. Lower the
cooktop.
3. Grasp each side of the backguard and lift it
straight up.
4. Turn backguard over. Remove the four
screws holding the back cover panel, then
remove the cover.
5. Roll bottom of fluorescent tube away from
you until both ends can be removed from the
receptacles. Replace with a 25watt cool-
white fluorescent tube.
6. Replace the back cover panel and screws.
7. Replace the backguard. Reconnect the
electrical plug under the cooktop.
8. Plug in appliance or reconnect at the main
power supply.
20