Table of Contents
Advertisement
Typical
surface
burner flame
at highest
setting
Surface burners
Lift up and secure the cooktop, following
instructions under "Lift-up cooktop" below.
Wipe off surface burners with warm, soapy
water and a sponge after each use.
Occasionally
check the burner flames for proper
size and shape as shown. A good flame is blue
in color. If flames lift off ports, are yellow, or are
noisy when turned off, you may need to clean
the burners (see "Cleaning tips" on page 19) or
call a qualified technician for adjustment,
Lift-up cooktop
1.
Remove surface burner grates and reflector
pans. Also remove griddle cover, griddle and
insert (under griddle).
2.
3.
Lift front of cooktop, and swing up the support
rod. Do not raise cooktop high enough to hit
the backguard.
Carefully lower the cooktop onto the support
rod. Be sure the support rod fits in the corner
notch of the cooktop.
Advertisement
Table of Contents
