NEC Univerge SV8500 Programming Manual page 206

M-28A MONITORING - ACD SUPERVISOR - ACD
When Multi-Path Monitor Connection is enabled
Terminal Kind / Environment
Agent/Supervi-
Calling Party
sory Position
Dterm/Trunk
Dterm
IP terminal
Legacy Trunk
DtermIP/
DtermSP30*1
DtermIP/
DtermSP30*1 MG(PRI)*2
MG(SIP)*3
IP terminal*4
Terminal*5 Terminal/Trunk
(*1) Available for Q version or later/Proprietary Protocol only.
(*2) MG-24PRIA/SCA-24PRIA (Proprietary Protocol only)
(*3) MG-16SIPMGA/SCA-16SIPMGA (Available for SP-3905 MG SIP (16) PROG-A 02.01.00.00 or later)
(*4) IP terminal stands for any IP terminal other than DtermIP in this table.
(*5) Terminal stands for any terminal other than Dterm in this table.
Standalone
Multi-path Switch
Single-path Switch
Single-path Switch
Multi-path Switch Multi-path Switch
Single-path Switch Single-path Switch
– 190 –
Peer-to-Peer
FCCS
FCCS
Single-path Switch
Multi-path Switch
Single-path Switch