Table of Contents
Advertisement
3.2.1 Netw ork Setup / Connection
Network/Connection/
Port
①
Max. Connections
②
TCP Port
③
UDP Port
④
HTTP Port
⑤
RTSP Port
⑥
HTTPS
Network/Connection/
ONVIF
⑦
Onvif (HTTPS)
Network/Connection/
RTSP
⑧
RTSP
Description
The maximum number of network connections for the camera. Select a value from 1 to 20.
The default Transmission Control Protocol (TCP) port setting is 37777. To change the setting,
select a number in the range 1025–65534.
The default User Datagram Protocol (UDP) port setting is 37778. To change the setting, select a
number in the range 1025–65534.
The default Hypertext Transfer Protocol (HTTP) port setting is 80.
The default Real Time Streaming Protocol (RTSP) port setting is 554.
The RTSP stream query format is:
Main Stream: rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=0
Sub Stream: rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=1
Note:If you are streaming video on a Blackberry device, set the format to H.264B, the resolution
to CIF, and disable audio.
Select the check box to enable HTTP Secure (HTTPS) protocol. When HTTPS is enabled, you can
log in to the camera by typing https://[camera ip] in your browser.
The default HTTPS port setting is 443.
Description
ONVIF (Open Network Video Interface Forum) is a global open standard for the interface of IP-
based security products. To enable ONVIF, select the Enable check box. To disable it, select the
Disable check box.
내용
Select a RTSP Over TLS and Max RTP Length
14
Advertisement
Table of Contents
