Bosch Axxis+ WFR 2450 Operating & Installation Instructions Manual page 15

Indicator light in the
Start/Pause" button
The indicator light conveys the following
information:
Indicator light flashing red
Program can be started.
Putting in laundry is possible.
Indicator light glowing red
Program is running.
Putting in laundry will be possible after pressing the
Start/Pause button.
Indicator light flashing yellow
Program can be started.
Putting in laundry is not possible because the door
is locked for reasons of safety.
Indicator light glowing yellow
Program is running.
The child lock is active or putting in laundry will not
be possible after pressing the Start/Pause button.
Indicator light off
Door is open and/or the program has ended.
i Exception: If child lock was selected, the
indicator light is on (yellow) at the end of the
program; the door is locked.
Load adjust
Load adjust" matches the water and power con
sumption to each program - according to the
amount of laundry and type of fabrics.
Therefore water and energy consumption are
reduced when washing small amounts of laundry.
The flow sensor measures the water flow rate like
an internal water gauge and meters the exact
volume of water required for the amount of laundry.
The stepless water level sensor ensures that the
water level is correct in each program for washing
your laundry - from our economical Regular/
Cotton" programs to the gentle Delicates/Silk" and
Wool" cycles.
Unbalanced load detection system
The automatic unbalanced load detection system
spins the laundry several times to ensure even
distribution.
If the wash load is unevenly distributed, it is not
spun for reasons of safety or the end speed is
reduced.
In the woolens program the appliance attempts to
start the spin cycle only twice in order to prevent
laundry from shrinking.
15