Whirlpool SES374H Use & Care Manual page 29

S
ETTING THE CONTROLS
1.
Press AUTO CLEAN.
The clean indicator light will light up.
This will automatically set a 3
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
⁄ hour before the cycle is over.
2
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
1
shorter than 3 ⁄ hours, use the hour and minute
2
pads to set the cleaning time you want. Press
the "up" (s) or "down" (t) pad(s) until a time be-
1 1
tween 2 ⁄ -4 ⁄ hours shows on the display.
2 2
•
1
Use 2 ⁄ hours for light soil.
2
•
1 1
Use 3 ⁄ -4 ⁄ hours for average to heavy soil.
2 2
3.
Start the oven.
The on and heat indicator lights will light up.
NOTES:
•
Make sure the door is closed all the way. If the
door is open even a little, it will not lock. If the
door is closed, it will lock after you press
START/ENTER.
•
Do not attempt to open the oven door while
locking.
4.
After the Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
5.
After the Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display.
6.
After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or
sponge.
If needed, touch up spots with a mildly abrasive
cleanser or cleaning sponge.
PRESS
1
⁄ -hour
2
AUTO
CLEAN
PRESS
TIME
PRESS
START
ENTER
PRESS
OFF
CANCEL
USING THE SELF-CLEANING CYCLE
YOU SEE
YOU SEE
(example shows 4
cleaning time)
YOU SEE
5 SEC
YOU SEE
ON
ON
1
⁄ -hour
2
ON
ON
29