Starting A Function; Canceling A Function - Whirlpool RS675PXG Use And Care Manual

Command pads
The command pads tell the oven what to
do and in what order. Some command pads
have an Indicator Light. The Indicator Light
comes on when you press the command
pad. The ON Indicator Light comes on
when you press START/ENTER for an oven
function.
Using the control lock
The control lock prevents unwanted use of
the oven by disabling most of the control
panel command pads (except CLOCK and
TIMER SET/OFF).
NOTES:
• Control lock is only available when oven
is not in use or control has not been set.
• Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.

Starting a function

After programming a function, you must
press START/ENTER to start the
function. If you do not press
START
START/ENTER within 5 seconds
ENTER
5 SEC of programming, "START?" will
show on the display as a reminder. The
control will return to time of day mode after
5 minutes if START/ENTER is not pressed.

Canceling a function

OFF/CANCEL will cancel any function
except for the Clock and Timer Set
functions. When you press
OFF
OFF/CANCEL, the display will
CANCEL
show the time of day or, if Minute
Timer is also being used, the time remain-
ing. To cancel the Minute Timer, see "Using
the electronic Minute Timer" section.
USING YOUR RANGE
To lock or deactivate the control panel:
Press and hold START/ENTER for 5
seconds. A single tone will sound
and "Loc" and
START
temperature display. When the
ENTER
control is locked, "START?" will
5 SEC
appear on the display if you press any
command pad.
To unlock the control panel:
Press and hold START/ENTER for 5
seconds. A single tone will sound
and "Loc" and
START
the temperature display.
ENTER
5 SEC
NOTE: You may hear a fan blowing in
the oven even after you press OFF/CANCEL.
This is the cooling fan. It will turn off when
the oven cools down.
will appear on the
will disappear from
15