Replacing The Platter - Ferris Voyager FS5250 Series Operator's Manual

2. Disconnect the cables from the battery, negative [-] cable
first (A, Figure 42).
42
3. Clean the battery terminals and cable ends with a wire
brush until shiny.
4. Reinstall the battery and reattach the battery cables,
positive [+] cable first (B).
5. Coat the cable ends and the battery terminals with
petroleum jelly or non-conducting grease.
6. Reinstall the battery box cover and rubber strap.
34

Replacing the Platter

43
1. Use your hands to remove the platter spring pin (C,
Figure 43).
2. Slide the platter (A) off the platter motor shaft (B).
3. Slide the new platter onto the platter motor shaft.
4. Use your hands to replace the platter spring pin.
ferrismowers.com