Sprayer Control Functions And Locations - Ferris Voyager FS5250 Series Operator's Manual

Moving a lever forward increases the FORWARD speed of
the associated wheel, and pulling back on a lever increases
the REVERSE speed.
Do not attempt to move the ground speed control levers until
the parking brake has been released.
Note: The further a lever is moved away from the neutral
position the faster the drive wheel will turn.
See the Driving the Unit section for steering instructions.
Parking Brake Pedals
This unit is equipped with a parking brake pedal (A, Figure 8)
and a parking brake release pedal (B).
8
DISENGAGED POSITION: Press the parking brake
pedal down fully with your foot to engage the parking brake.
ENGAGED POSITION: Press the parking brake release
pedal down fully with your foot to release the parking brake
pedal. The parking brake pedal will move upwards.
Drive System Release Valves
Icon
This unit is equipped with two drive system release valves.
The drive system release valves deactivate the hydraulic
system so that the unit can be pushed by hand. Both drive
system release valves must be in the same position whether
you are driving the unit or pushing it by hand. See Pushing
the Unit by Hand for operational information.
Sprayer Control Functions and
Locations
The information below briefly describes the function of
individual controls. Spraying requires the combined use of
several controls applied in specific sequences. To learn what
combination and sequence of controls to use for various tasks
see the Operation section.
9
Control
Sprayer Control List
Name
Drive System
A. Liquid Material Tank Caps
Release
B. Boom Release Latches
Valves
C. Liquid Material Tank Selector Lever
D. Spray System Pressure Gauge
E. Spray Pressure Adjustment Control
F. Spray Wand
G. Boom Control Levers (Spray Toggle Valves)
H. Spray Wand Hose Reel
I. Spray Pump ON/OFF Switch
Boom Release Latches
The boom release latches (A, Figure 10) release the left and
right spray booms.
13