System Cable Connections - Motorola MTR2000 T5544 Instruction / Field Service Manual

Installation

System Cable Connections

Trunking/MRTI Connector
System Connector
32
System connections are made through one or both of the following connectors:
- the Trunking/MRTI connector and
- the System connector.
The location of the Trunking/MRTI connector and System connector on the sta-
tion rear panel is shown in Figure 9.
The following cables are available for trunking system applications:
- 7.62m (25ft) Trunk Cable, part # 3083765X04
- 15.24m (50ft) Trunk Cable, part # 3083765X05
- 22.86m (75ft) Trunk Cable, part # 3083765X06
- 30.48m (100ft) Trunk Cable, part # 3083765X07
The following cable is available for MRTI applications:
- Interface cable for Zetron model 30, kit # TTO4097
The cable connected to the System connector can be configured for various system
options.
A generic System cable is available for variety of applications such as Wild Card,
Main Standby, and Auxiliary Input/Output:
- generic System cable, kit # TKN9205A
This cable provides a housing shell for connection to the 96 pin backplane con-
nector, 30 loose pins, and a quantity of 30 of 24 gauge wires (2 meter long with a
pin for header on one end and unterminated at the other end).
Table 4 provides a description of commonly used System Connector pins.
68P81096E37-N
06/28/05