Installation
Power Supply Connections
CAUTION
CAUTION
28
AC Input Power Connection
Do not apply ac power to the station at this time. Make sure that the circuit
!
breaker associated with the ac outlet is turned to OFF.
!
The ac socket-outlet must be installed near the equipment and must be easily
accessible.
Each station is shipped with an 2.5m (8ft) 3-conductor line cord. Figure 9 shows
the ac line cord connector. Insert the plug into an appropriate grounded outlet.
The North American line cord is equipped with a NEMA 5–15 plug, intended for
110/120Vac operation.
The optional European line cord (Option X189AA) is equipped with a "Schuko"
style CEE VII (7) plug, intended for 220/240VAC operation.
Plugs for other countries are available as the following options:
Location
U. K.
Australia
If an alternate line cord is required, obtain a line cord employing "HAR" flexible
cord with fittings approved by the safety testing agency in the end-
Option Number
X162AD
X191AD
use country.
68P81096E37-N
06/28/05