CARING FOR YOUR RANGE
C
OIL ELEMENTS AND REFLECTOR BOWLS
Replacing
1.
Make sure all coil elements are off and cool
before replacing coil elements and reflector
bowls.
2.
Line up openings in the reflector bowl with the
coil element receptacle.
3.
Hold the coil element as level as possible with
the terminal just started into the receptacle. Push
the coil element terminal into the receptacle.
4.
When the terminal is pushed into the receptacle
as far as it will go, push down the edge of the
coil element opposite the receptacle.
32
385
MODEL RF
PXE
(
) (
O F F
B A K E
B A K E
.
CONT
)