Using Your Range; Using The Surface Units - Whirlpool RF364BBD Use And Care Manual

Using Your Range
To obtain the best cooking results possible, you must operate your range properly. This
section gives you important information for efficient and safe use of your range.
Using the surface units
Push in control knobs before turning
them to a setting. You can set them
anywhere between HI and OFF.
Surface unit markers
The solid dot in the surface unit marker
SurFace unit indicator lights
One of the Surface Unit Indicator Lights on
the control panel will glow
when a surface unit is
turned on.
Hot surface indicator light
The Hot Surface Indicator Light on the
control panel will glow when a
surface unit becomes too hot
to touch. The Indicator Light
will continue to glow as long as
the surface unit is too hot to
touch, even after it is turned off.
Fire Hazard
Turn all controls off when done
cooking.
Failure to do so can result in death,
fire, or burns.
Until you get used to the settings, use
the following as a guide. For best results,
start cooking at the high setting; then turn
the control knob down to continue cooking.
IE~ING
RECOMMENDED USE
5
2-4
LO
l
For gravy, pudding, and
icing.
l
To cook large amounts
of vegetables.
l
To keep food cooking
after starting it on a
higher setting.
l
To keep food warm until
ready to serve.