The Electronic Oven Control - Whirlpool RF364BBD Use And Care Manual

The electronic oven control
Electronic display
Oven Temperature Clock Minute Hour Minute Start/ Otf/
Selector pads pad timer pads pads
enter cancel
pads (p.13) set and
pad pad
off pads
(P.15) (P.15)
(pp.1 3-14)
Display/clock
l
When you first plug in the range,
everything on the display will light up for
one to two seconds, then a time of day
and "PF" will appear on the temperature
display. If, after you set the clock (page
13), "PF" again appears on the display,
your electricity was off for a while. Reset
the clock.
l
When you are not using the oven, the
control is an accurate clock.
l
When you are using the oven or Minute
Timer, the display will show times,
temperature settings, and what command
pads have been pressed.
l
When showing the time of day, the
display will show the hour and minutes.
. When you are using the Minute Timer,
the display will show minutes and seconds
in the following sequence:
-For settings from 1-59 minutes, the
display will count down each second.
- For settings one hour or over, the
display will count down each minute.
Command pads
The command pads tell the oven what to do
and in what order. A few examples:
-Clock tells the oven you are going
to set the clock.
CLOCK
I
12
-Off/Cancel tells the oven to turn off.
Each command pad (except Off/Cancel and
Start/Enter) has its own Indicator Light. The
Indicator Light comes on when you press
the command pad.
Using the control lock
The control lock prevents unwanted use of
the oven by disabling the control panel
command pads.
NOTES:
l
Control lock is only available when oven
is not in use or control has not been set.
l
Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
To lock or deactivate the control panel:
Push and hold the Start/Enter pad for
five seconds. A single tone will
sound and "Lot" will appear on
the temperature display.
To unlock the control panel:
d hold the Start/Enter pad for
five seconds. A single tone will
sound and "Lot" will disappear
from the temperature display.