Roland Edirol StudioCanvas SD-80 Service Notes page 16

sound by listening to it through the headphones.
Press the same button to stop the effect.
fig.3-8_65
MFX
Press the [INST] button to send a snare sound at an interval of 2.5 seconds
from the power source. Make sure that a delayed sound is heard after the
original snare sound.
SYSTEM EFFECT (Delay)
Press the [EFFECTS] button to send a castanets sound at an interval of 2.5
seconds from the power source. Make sure that a delayed sound panning
right and left, is heard after the original castanets sound.
SYSTEM EFFECT (Reverb)
Press the [SYSTEM] button to send a snare sound at an interval of 2.5
seconds from the power source. Make sure that the snare sound
reverberates.
9.
Factory reset
If all the test results are OK, initialize the system parameters as the last step.
Press the blinking [PREVIEW] button to start initialization. Initialization is
completed when the "Complete!" message appears.
Turn off the SD-80's power to end the test mode.
fig.3-9_65
SD-80
16