Epson SureColor F6370 User Manual page 53

Options
Paper Feed Adjust
Paper Suction
Feeding Tension
Take-up Tension (if the take-up reel is
installed)
Prevent Sticking
Setting Name
Restore Settings
Parent topic: Using the Control Panel Menus
Related tasks
Loading Media
Saving Sets of Media Settings
Adjusting the Media Feed
Description
Use this setting if you are unable to resolve banding issues
even after head cleaning and alignment. Select one of the
following:
Pattern: prints an adjustment pattern that you can
measure and then enter the measured distance.
Value: lets you choose an adjustment between –0.70 and
+0.70%. Select a higher value to reduce dark bands, or a
lower value to reduce white bands.
Set from –4 to 0 to increase the gap between the print head
and thin or soft paper. If print quality is reduced or media
does not feed correctly, you may need to lower the suction.
Set from Lv1 to Lv5. Increase the value if creases appear
in media during printing.
Set from Lv1 to Lv4. Decrease the value if creases appear
in media during printing or ink adheres to the back of the
take-up roll. Increase the value if there is too much slack in
the media or thick media cannot be wound correctly.
Select On only if the media sticks to the platen when the
product is turned on or when printing starts. Select Off for
normal printing.
Enter a name up to 22 characters for the custom paper
settings.
Select Yes to return all settings for the selected custom
paper to their default values.
53