Husqvarna DM400 Operator's Manual page 3

Product overview
3
2
4
1. Drill spindle
2. Quick release washer
3. Leakage hole
4. Gardena male coupling with water valve
5. Gear selector
6. On/Off switch
7. Handle
™
8. Smartstart
9. LEDs to show power output
10. Electronics box
11. Assembly plate for Husqvarna drill stand
12. PRCD
Note: In this manual we use the term PRCD for
PRCD and GFCI.
13. Water connector
14. Wrench
15. Operator's manual
1188 - 005 - 08.01.2020
6
5
12
13
7
9
11
10
14
Symbols on the product
WARNING! This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always use approved personal protective
equipment. Refer to
equipment on page 7 .
This product complies with applicable EC
directives.
8
15
Personal protective
3