Barracuda CloudGen Firewall
Menu to boot into
ART
next reboot
Barracuda NG Firewall F600 Revision C
Enables you to set a flag that will cause the appliance to boot into
ART the next time it is rebooted.
Once set, this flag can not be deleted through the menu. When
during the
rebooted, the appliance will not start Barracuda OS, but ART
instead. You may connect to the appliance by using the serial
console or by SSH. A Control Center managed box running in ART
mode cannot be managed through the CC, although it will build a
connection to the CC signaling its presence.
7 / 8