Advertisement
Barracuda CloudGen Firewall
Networks Appliance Safety Instructions
Component
CPU
Memory
Mass Storage
LCD Module
USB
Form Factor
Dimensions (W/D/H)
Weight appliance
Power Supply
Power Supply Input Voltage
Power Supply Voltage
Power Supply Watts
Storage Temperature
Operation Temperature
Relative Humidity
Certifications
The hardware specifications list was valid at the time this manual was published. The listed
components are subject to change at any time, as Barracuda Networks may change hardware
components due to technological progress. Therefore, the list may not reflect the current
hardware configuration of the Barracuda Networks NG Firewall or NG Control Center appliance it
was delivered with.
Status LEDs and Acoustic Signals
Your appliance is equipped with a variety of LEDs. One of them is the Status LED. It is either
labeled with a heart symbol or the term Status. It indicates the appliance's operational state by
changing colors between green, orange and red and by changing between blinking and steady
glowing. The table below shows the different meanings of the different glowing states.
Barracuda NG Firewall F600 Revision C
Specifications
(Sub-Models .C10 and
.F10)
160 GB SSD
Single, internal
Specifications
(Sub-Models .C20 and
.F20)
Intel Quad Core
8 GB
160 GB SSD
2 x 20 characters
2x USB 2.0
1U rack mount
427 x 450 x 44 mm
17 x 17.7 x 1.7 in
7 kg / 15.4 lbs
Dual, internal
100 - 240 V, AC
50 Hz - 60 Hz
250 W
-20 °C - +60 °C
0 °C - 40 °C
5% - 95%, non-condensing
CE, FCC, ROHS
Specifications
(Sub-Model .E20)
300GB SSD
Dual, internal
4 / 8
Advertisement
