Download Print this page
Jackson Flex Drive E Owner's Manual

Jackson Flex Drive E Owner's Manual

Electric boat motor

Advertisement

Quick Links

PATENT PENDING
FLEX DRIVE E MODEL 91652
12/24 VOLTS
150 - 249 WATTS
FCC FRN 0026847665
OWNER'S MANUAL
ASSEMBLY INSTRUCTIONS,
MAINTENANCE AND WARRANTY

Advertisement

loading

Summary of Contents for Jackson Flex Drive E

  • Page 1 PATENT PENDING FLEX DRIVE E MODEL 91652 12/24 VOLTS 150 - 249 WATTS FCC FRN 0026847665 OWNER’S MANUAL ASSEMBLY INSTRUCTIONS, MAINTENANCE AND WARRANTY...
  • Page 2 Thank you for choosing the Flex Drive E. Whether you are in one of Jackson Kayak’s Flex Drive boats or in one of the models from Blue Sky Boatworks, this Flex Drive E and it’s special propellers are designed to connect with your Flex Drive lower unit to provide electric-powered propulsion.
  • Page 3 PATENT PENDING Warranty, Service and Customer Support The Flex Drive E is manufactured by PropEle Electric Boat Motors, Inc. For problems with any motor head components, call Customer Service at 425-502-5232, 9am - 5pm, Pacific Time Zone. You will need pre-authorization to arrange for return and repair at our factory.
  • Page 4 Unpacking the Flex Drive E The box should contain: Flex Drive E Motor Unit If your Flex Drive system has a 3-blade prop, we recommend replacing it with one of our 2-blade props to optimize performance. If your Flex Drive system has a 2-blade 10"...
  • Page 5 Prop to the Proper Flex Drive E Prop. The patented Flex Drive System makes switching from pedal to electric power quick and easy. The Flex Drive E unit installs in the same coupling slots used by the pedal drive unit.
  • Page 6 This is a safety interlock feature. (A) Align the coupling slots of the Flex Drive E upper unit with the slots on the lower drive. Lower lever and carefully lower the unit until it is seated.
  • Page 7 2. Mounting the Flex Drive E (cont.) (C) Raise the deployment lever to engage the motor. When the lever is in the down position the lower unit is in the up position, retracted inside the boat. When the lever is in the middle position the lower unit is in the middle position.
  • Page 8 3. Batteries — Choice, Connections, Safety The Flex Drive E system has 3 interrelated parts: 1) The motor. 2) Your choice of battery. 3) A prop to match your battery voltage. As the user, you can choose which battery (purchased separately) will power your Flex Drive E.
  • Page 9 Output and Performance Ratings BLUE SKY BOATS: Calm conditions, 200 lb operator BLUE SKY WITH 24V BATTERY OPTIONS and 50 lbs. of gear. 22.2 Ah K2 Lithium 9.6 Ah K2 Lithium Speed Watts: Speed: Runtime: Range: Runtime: Range: Setting Input HOURS MILES HOURS...
  • Page 10: Connecting To The Battery

    4. Connecting to the Battery You must purchase the appropriate connector kit for the battery you selected for your Flex Drive E . You will need connect your battery as shown below. NOTE: You will need to install the correct battery lug ring connectors to connect terminal ends to the cable.
  • Page 11 5. Operating the Flex Drive E Affix the optional specification sticker to match the battery you are using. Once the Flex Drive E is properly attached and tightened down and battery power is connected, confirm that your battery is well- secured before operation.
  • Page 12: Operation Tips

    6.Operation Tips • The throttle maintains its setting without being held. • Always sit within easy reach of the lever and throttle controls for safety. • RESET: When the safety interlock shuts off your motor (i.e. when the key is removed or when the power cord is removed and replaced), you must reset the motor.
  • Page 13: Care And Maintenance

    7. Care and Maintenance • Do not throw or drop the motor or store it under heavy items. Never lift or tie up boat by the motor. • Promply recharge the battery after use • Completely air-dry motor in an upright position before stowing. If stored wet and upside down, water may stagnate in the motor cover.
  • Page 14: Frequently Asked Questions

    3 seconds before attempting to operate. What prop should I use? Flex Drive E props have two blades and match 12 or 24V battery voltages. Use the JK 5" Pitch 24V Prop (marked '9 x 5') with 24V batteries. Use the JK 10"...
  • Page 15 Recharge soon after each outing for longest life. Charge until the charger light turns green, and disconnect batteries from chargers within 24 hours to save energy. See battery instructions for use and care. Are the batteries dangerous? All high-power batteries are dangerous to persons, property and to the environment if improperly discarded.
  • Page 16 PATENT PENDING Protected by pending patents © 2020 Jackson Kayak PropEle Electric Boat Motors is a trademark of PropEle Electric Boat Motors, Inc. Flex Drive and Flex Drive E are trademarks of Jackson Kayak V3.20200211...

This manual is also suitable for:

91652