Installation Steps; Anti-Tip Bracket Installation - Whirlpool GS440LELB0 Installation Instructions Manual

Plug power
D
supply cord
into grounded
outlet
Make proper
D
gas connection
Install anti-
B
tip bracket
Secure range
C
with anti-tip
bracket

Installation steps

Preparation
A
WARNING
Excessive Weight Hazard
Use two or more people to move and
install range.
Failure to follow this instruction can
result in back or other injury.
B

Anti-tip bracket installation

WARNING
Tip Over Hazard
A child or adult can tip the range and
be killed.
Connect anti-tip bracket to rear range
foot.
Reconnect the anti-tip bracket, if the
range is moved.
Failure to follow these instructions
can result in death or serious burns
to children and adults.
Page 4
Remove shipping
A
material.
Remove oven
racks and parts
package.
Replace
D
storage drawer
1.
Put on safety glasses and gloves. Do Not
use oven door handle to lift or move the range.
2.
Remove oven racks and parts package
from inside oven. Remove shipping materials,
tape and protective film from range.
Contact a qualified floor covering installer for
the best procedure for drilling mounting holes
through your type floor covering.
4.
Use the anti-tip bracket
template/instruction sheet to install
the anti-tip bracket.
Anti-tip bracket must be
anchored securely to the
sub floor.
Depending on the
thickness of your
flooring, longer
screws may be
needed to anchor
the bracket to the
sub floor. Longer
screws are available from
your local hardware store.
Check cooktop
E
burners for
proper flame
Check broiler
E
burner for
proper flame
Check oven
E
burner for
proper flame
Level range
C
3.
Keep cardboard shipping base under
range to prevent damage to floor covering.
cardboard
shipping base