Power Up The Headset Base; Charge The Headset Battery - VTech VH6221 Abridged User Manual

Getting started

Power up the headset base

1. Plug the small end of the headset base power adapter labelled
(green dot) at the rear of
the headset base.
2. Plug the large end into
an electrical outlet not
controlled by a wall switch.

Charge the headset battery

Hang the headset onto the magnetic charging mount.
The magnet holds the headset in place.
• The charging LED on the base will turn steady red while charging.
Note
• For optimal performance, charge the headset battery for at least 30 minutes before
use. The battery is fully charged after 2 hours of continuous charging. When the
headset is not in use, recharge by hanging it onto the headset base.
to the
4
POWER jack