Adjusting The Oven Temperature - Whirlpool FEC330B Important Instructions Manual

Adjusting the oven temperature control
Oven temperature controls will gradually
shift after years of use. So, even though
your new oven is properly adjusted to
provide
accurate temperatures, it may cook
faster or slower than your old oven.
if, after using the oven for a perii of time,
you are not satisfied with the temperature
settings, you can adjust them by following
these steps:
1. Make sure
the Oven Temperature
Control Knob is turned to the off position.
Pull
knob straight
off and flip it
over.
2.
Loosen
the locking screws inside the
control
knob. Note the position of the
notches.
3. To lower the temperature, hold knob
handle firmly and
move
the tooth a notch
counterclockwise.
Each notch
equals
about 10°F (5°C).
4. To raise the temperature, hold knob
handle firmly and move the tooth a notch
clockwise.
Each notch equals about
10°F (5°C).
5. Tighten
the locking screws and
replace
the control knob.
Notches Tooth
Locking screws
13