Table of Contents
Advertisement
I I'
if you are using a Cook
Power other than HIGH.
When the cooking
time
ends, "End" will show on
the Display
and 4 beeps
BEEPBEEP~EEPBEEP
will sound. (You can stop
the beeping
by opening
the door or by touching
CANCEL.) "End" will remain
on the Display
and a beep
will sound every 30 sec-
onds until the door is
opened
or CANCEL is
touched.
The Display
will
then show the time of day.
NOTE: If the oven light and fan come
on when you touch
START, the
Start Time feature
has not been set correctly.
Open and close the door,
reprogram
the cooking
sequence
and START TIME, then touch
START.
Additional
Information
l
Additional
cycles
can be set when using START TIME to start cooking
at a
latertime.
Follow instructions
underthe
proper
heading
(Using AUTO SET,
Cooking
with the Temperature
Probe, Defrosting,
Using KEEP WARM before
you program
START TIME.
l
You can change
time, or add cycles
at any time during the Start Time
cycle.
I. Touch the cycle
you wish to change
or add.
2. Touch Number
Pads for new time.
3. Touch COOK POWER, if desired.
4. Touch number
of new Cook Power, or touch COOK POWER again
if High
is desired.
*
5. Touch START. The oven will cook at the new time and Cook Power.
l
Opening
the door does not stop the START TIME operation.
CAUTION:
Use foods that will not go bad or spoil while waitlng
for cook-
ing to start. Avold
using with milk or eggs, cream
soups, cooked
meats,
poultry
or fish, or any Item with baking
powder
or yeast.
Smoked
or frozen meats
may be used; so can vegetables,
fruits and
casserole-type
foods.
Any food that has to wait for cooking
to start should
be very cold or
frozen before
lt is put in the oven. MOST UNFROZEN FOODS SHOULD
NEVER STAND AT ROOM TEMPERATURE MORE THAN TWO HOURS BEFORE
COOKING
STARTS.
Advertisement
Table of Contents
