Dnp3 Data Mappings; Overview; Point List For The 650 Series Ieds - ABB Relion 650 Series Point List Manual

1MRK 511 244-UUS A
Section 2
2.1

Overview

This document describes the DNP3 data points and structures available in REC650/REB650/
REG650/REL650/REQ650/RET650 Ver. 1.1. The data points are unmapped as a default. The point
lists describe a superset of all data available including the optional functionalities.
The point tables show all the available DNP3 data points in these IEDs. The DNP3 points can be
freely added, removed, reorganized and reconfigured using PCM600.
As a default, the class assignments are Class 0 and Class 3 for binary inputs and outputs and for
double bit indications. The class assignment for analog inputs and for counters are Class 0 and
Class 2. Analog values are provided with default scalings. The scalings can be freely modified.
This list represents the superset of DNP3 points. The actual set of available points depends on the
product, optional functionalities and configuration.
The point list table only shows the signals of the first instance of each function if more than one
instance of a function can be configured.
2.2

Point list for the 650 series IEDs

Table 6: Signal point list
Function name
Hardware input and output monitoring
BIO_CPI
Table continues on next page
DNP, 650 series
Point list manual

DNP3 data mappings

See the engineering manual and DNP3 communication protocol manual for more
information.
Signal type
Binary inputs
© Copyright 2011 ABB. All rights reserved
Signal name
BIO_3; BIO_CPI:BI_ERROR
BIO_3; BIO_CPI:BI1
BIO_3; BIO_CPI:BI2
BIO_3; BIO_CPI:BI3
BIO_3; BIO_CPI:BI4
BIO_3; BIO_CPI:BI5
BIO_3; BIO_CPI:BI6
BIO_3; BIO_CPI:BI7
BIO_3; BIO_CPI:BI8
BIO_3; BIO_CPI:BI9
BIO_3; BIO_CPI:BO_ERROR
Section 2
DNP3 data mappings
GUID-4AE0B809-07EF-43CC-BA71-0428E4880165 v2
GUID-A45A533F-01F8-47DF-9DC4-E83157389602 v3
Description
In CMT the 1st input signal
for binary input and output
card at slot 3 is shown as
'BIO_3;BIO_CPI.BI1''
Binary input module error
Binary input 1
Binary input 2
Binary input 3
Binary input 4
Binary input 5
Binary input 6
Binary input 7
Binary input 8
Binary input 9
Binary output module error
15