Table of Contents
Advertisement
Base Support Bars
Barres de support
de la base
Brush Servicing
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
TO CHECK BRUSHES:
➢ ➢ When brushes are worn to the level
of the base support bar, replace the
agitator.
TO REPLACE BRUSH AGITATOR
UNIT
➢ ➢ Remove POWER NOZZLE cover,
belt and agitator assembly. (See
"REMOVING BELT").
➢ ➢ Remove agitator supports,
washers, screws, end brush, brush
sprocket, and brush sprocket
flange from ends of agitator
assembly.
➢ ➢ Replace agitator assembly.
➢ ➢ Reassemble agitator assembly.
➢ ➢ To line up screw holes in dowel,
sprocket and end brush, be sure the
brush portion of end brush lines up
with brushes on brush dowel.
➢ ➢ Replace belt, agitator assembly and
POWER NOZZLE cover screws.
(See "REPLACING BELT").
- 40 -
WARNING
Advertisement
Table of Contents
