Table of Contents
Advertisement
www.seagate.com
Introduction
This document describes how to install the Seagate® FireCuda® PCIe NVMe M.2 SSD on your computer. The
Seagate FireCuda SSD is a versatile NVMe SSD that is specifically developed for the needs of professional-level
gamers. See the SSD product documentation for warranty and more details.
The FireCuda SSD comes in the double-sided M.2 2280 form factor and can be used in any computer system
with an 80 mm long M.2 M-key slot.
NOTE
Warranty
5 years limited warranty. See:
https://www.seagate.com/support/warranty-and-replacements/limited-consumer-warranty/
Ensure that you review any warranty policy and instructions provided by your motherboard and computer
manufacturer and you follow appropriate procedures to install your storage device. By proceeding with any
installation, you agree to be solely responsible for any failure to follow any manufacturer's instructions
Preparing for Installation
Unpack the SSD.
Inspect the SSD for any damages.
Power down and power drain your computer according to the instructions provided in the computer
product documentation.
Backup the data from the existing storage device.
CAUTION
Recommendations
Make sure that your motherboard is updated to the latest BIOS.
For optimal performance:
Provide sufficient airflow and cooling.
—
Use a motherboard-integrated heat sink and cooling system.
—
Required Tools
A suitable screwdriver and screws to fasten the M.2 SSD.
Seagate FireCuda PCIe NVMe M.2 SSD Installation Guide
The desktop and laptop shown in this document are for demonstration
purposes only. Your computer might be different than the ones shown here
but the procedure is the same.
Electrostatic discharge (ESD) can damage the SSD. Make sure that you
install the SSD at an ESD-safe workstation. Ground yourself to protect the
device from any static electricity present in your body.
4
Advertisement
Table of Contents
