Haier HCFU-42CF03 Service Manual page 27

Press FAN,For each press, operation mode changes as follows:
4
LOW
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically according to the indoor temperature.
Press ON/OFF button
5
Unit stops running.
Note:
During Auto run operation, temp. setting which can be adjusted will be shown in LCD display, unit will select
heating, cooling or fan operation according to the room temp.
Cooling operation
TEMP
ON
OFF
FAN
HEALTH
1
5 4
MODE
SLEEP SWING
SET
CLOCK
TIMER
POWER/SOFT
HEAT
RESET LIGHT LOCK
Dry operation
1 Press ON/OFF button
Unit starts running.
The previous status appears on the display (except for TIMER, SLEEP mode)
Press MODE button. For each press, operation mode changes as follows:
2
Select Drying operation shows"
Select temp. button
3
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease quickly.
27
Commercial Air Conditioner
MID HIGH AUTO
Press ON/OFF button
1
Unit starts running.
The previous status appears on the display (except for TIMER, SLEEP mode)
Press MODE button. For each press, operation mode changes as follows:
2
AUTO COOL
Select cooling operation, Shows"
3 Select temp. button
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease quickly.
Press FAN button. For each press, fan speed changes as follows:
4
LOW
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically according to the indoor
temperature.
5 Press ON/OFF button
Unit stops running,and when entry this mode for the next time,it will show the
previous setting.
AUTO COOL
", Dry operation starts
DRY FAN
" , Cooling operation starts.
MID HIGH
DRY FAN HEAT
Model: HCFU-42CF03
HCFU-42HF03
HEAT
AUTO