Part Iii: Advanced Commands; Advanced Commands; Terms Used In This Section - Bosch D1260 Owner's Manual

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - Advanced Commands

Part III: Advanced Commands

Use this section of the manual to perform advanced system functions like add and delete user passcodes, reassign
authority levels to user passcodes and operate or change programmed scheduled events (Skeds) from the keypads.
As you make changes to the system, update the information contained in the tables in this guide to provide an
accurate account of the programmed information.

Advanced Commands

Some commands listed below may not be available. Contact your security company for more
information.
Advanced
COMMAND
+
+
+
+
+
+
+
+
+

Terms Used in This Section

Listed below are some of the terms you'll see throughout this section. Each term is covered in greater detail later
in this section and in Part II: System Commands.
Account
Area
Arm and Disarm
Authority Levels
Keypad
Keypad Scope
Panel
Relays
Skeds
32
Function
Bypass a Point
Unbypass a Point
Test Report
Status Report
Remote Program
Change Time/Date
Door Control
Access Level Change
Change Display
Move to Area
Extend Closing
One or more areas reporting under a particular account number.
A group of detection devices connected to your security system.
To switch your burglar detection devices "on" and "off." When the burglar detection
device is armed and is tripped, an alarm may be set off. When the burglar detection
devices are disarmed, the security system will not detect intruders. Detection devices
programmed as 24-Hour or Fire points are always on.
Levels of access authority assigned to passcodes.
Arming station used to operate your security system.
Determines which areas a particular keypad can access.
The main control unit, which is locked in a steel enclosure. It sends data to and
receives inputs from the keypads.
Optional dry contact outputs that respond to system events.
Functions programmed by your security company that occur at predetermined
Advanced
COMMAND Function
Change Sked
+
Delete Passcode
+
Change Relay
+
Change Passcode
+
Add Passcode
+
Default Text
+
Fire Test
+
Display Rev
+
Print Log
View Log
View Point Status
Bosch Security Systems | 9/04 | 50410D