Installing the HDD and ODD frame
1. Install the plastic filler and metal blank if the optical drive is not installed.
2. Align and place the HDD and ODD frame on the system.
3. Gently press down on the frame to secure it to the system.
4. Install the:
a)
front I/O bezel
b)
HDD and ODD bezel
c)
front bezel
d)
side cover
5. Follow the procedure in
Slim Optical Disk Drive
Removing the slim ODD and ODD latch
1. Follow the procedure in
2. Remove the
right side cover
3. To remove the ODD:
a) Disconnect the data cable and power cable [1] from the optical drive connector.
b) Slide the blue latch towards the left of the chassis, and push the drive forward [2].
56
Removing and installing components
After working inside your
computer.
Before working inside the
computer.