Installing The Internal Chassis Speaker - Dell Precision 7920 Tower Owner's Manual

b) front bezel
3. To remove the internal chassis speaker:
a) Disconnect one end of the internal chassis speaker cable from the connector on the system fan assembly [1].
b) Unroute the internal chassis speaker cable from the clip on the system fan assembly.
4. Press and hold the tabs [2] on either side of the internal chassis speaker, to slide and remove it out of the system [3].

Installing the internal chassis speaker

1. Press and hold the tabs on either side of the internal chassis speaker, and slide the speaker module into the slot to secure it to the
system.
2. Route the internal chassis speaker cable through the clip on the system fan assembly.
3. Connect the one end of the internal chassis speaker cable to the connector on the system fan assembly.
4. Install the following components:
a) air shroud
b) front bezel
c) side cover
5. Follow the procedure in
32 Removing and installing components
After working inside your computer