Block Icons For Sitrlrpa - Siemens SITRANS PCS 7 Function Manual

(6) Button for switching to the standard view of any faceplate
Use this navigation button to open the standard view of a block configured in the engineering
system. The visibility of this navigation button depends on the configuration in the engineering
system (ES).
You can find more information on this in the section "Opening additional faceplates" in the APL
Online Help.
14.1.9.6

Block icons for SitrLRPA

A variety of block icons is available with the following functions:
● Process tag type
● Limits (high/low)
● Violation of alarm and warning limits as well as the control system fault CSF
● Operating modes
● Signal status, release for maintenance
● Memo display
● Process value (PV1) and process value (PV2)
The block icons from template @TemplateAPL_SITRANS.PDL:
Icons
For more information on the block icon and operating options in the block icon, refer to the
following sections in the APL online help:
● "Configuring the block icons"
● "Block icon structure"
● "Operation via the block icon"
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Selection of the block icon in CFC
1
2
-
SITRANS LR PA
14.1 SitrLRPA
Special features
Block icon in "Out of service"
mode (example of block icon
type 1)
675